background image

 

00101084, Version 1.0 

18/19

Color-filter frame 

 

 

To insert or replace a color filter, remove the filter frame from the lens tube, as shown below.  
Insert the desired color filter and tighten the screw again. 

 
 

Loosen 

the 

       Tighten 

the 

clip 

 

 

 

 

 

 

 

 

clip 

 

 
 
 
 

 

 

          Insertion 

 

 

 

          of the 

 

 

 

          color filter 

 

 

 

          frame 

 
 
 
 

CLEANING AND MAINTENANCE 

The operator has to make sure that safety-relating and machine-technical installations are inspected by an 
expert after every four years in the course of an acceptance test. 
The operator has to make sure that safety-relating and machine-technical installations are inspected by a 
skilled person once a year. 

 

The following points have to be considered during the inspection: 
1)  All screws used for installing the devices or parts of the device have to be tightly connected and must not 

be corroded. 

2)  There must not be any deformations on housings, fixations and installation spots (ceiling, suspension, 

trussing). 

3)  The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or 

sediments. Further instructions depending on the installation spot and usage have to be adhered by a 
skilled installer and any safety problems have to be removed. 

 

 

 

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or 
solvents! 

 

 

 

The lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the light-output 
very quickly. The venting slots should be cleaned monthly. 

 

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried 
out by authorized dealers. 

 

Should you need any spare parts, please use genuine parts. 

 

If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only 
in order to avoid hazards. 

 

Should you have further questions, please contact your dealer.

 

Disconnect from mains before starting maintenance operation!

DANGER TO LIFE!

The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!

CAUTION!

Summary of Contents for 40001760





















Reviews: