Euroheat Nestor Martin IT33 Operating Instructions Manual Download Page 3 | Manualshive

Page: 3 / 32

background image

©

EUROHEAT

DISTRIBUTORS (H.B.S) LTD. April. 2011

Instructions Part Number IN1176 Ed.B

3

Contact Details:

Euroheat Distributors (H.B.S). Ltd.
Unit 2,
Court Farm Business Park,
Bishops Frome,
Worcestershire. WR6 5AY.

www.euroheat.co.uk

[email protected]

Advanced Driving Manual for the Plexus Range.

Document Part Number IN1172
Please contact your Euroheat Retailer, Euroheat web site or Euroheat directly for your
free copy.

Useful organisations

Solid Fuel Association

0845 601 4406

www.solidfuel.co.uk

The National Association of Chimney Sweeps

01785 811732

www.chimneyworks.co.uk

HETAS Ltd.

0845 634 5626

www.hetas.co.uk

The Model Range Explained

Thank you for purchasing your insert and helping to protect our environment. Nestor Martin and Euroheat insist
on progressive development to produce products which are market leading. Our aims are to produce inserts with
the latest innovations, user friendly operation and highly efficient for lower cost operation. When burning wood
you will be greatly assisting with reducing Co2 to the environment when compared to coal oil or gas.

This operation manual offers user information for the Nestor Martin IT33 multifuel and wood stove.

Model Identification

You will see on the front page of this document a label which confirms which model you have. This label also
advises you of the inserts unique serial number. This information is also attached to your insert for reference.

Important

Please ensure the warranty registration form is returned to Euroheat. In this way the model and its history will
be recorded for reference in the future.

Whilst we are always happy to assist you, please make sure you have read this manual before contacting the
technical support team.
Technical support telephone number 01885 491117. E-mail [email protected]

«
1
2
3
4
5
...
»

Summary of Contents for Nestor Martin IT33

































Reviews:

No comments

Related manuals for Nestor Martin IT33

Brand: Opus Pages: 15

Brand: United States Stove Company Pages: 20

TermoRossella Plus DSA

Brand: LA NORDICA Pages: 60

Brand: Quadra-Fire Pages: 38

Murcia Chimenea Large

Brand: La Hacienda Pages: 9

NIMBUS NIM-105N

Brand: Sawotec Pages: 19

Brand: Elmira Stove Works Pages: 8

Brand: COMPANION Pages: 8

THAMES TRAVEL BARGE 6910115

Brand: Clarke Pages: 24

Brand: Power Fist Pages: 20

Brand: Coleman Pages: 2

Brand: THERMOROSSI Pages: 32

Brand: THERMOROSSI Pages: 28

Brand: THERMOROSSI Pages: 43

Brand: THERMOROSSI Pages: 46

COMPACT SLIM S25 EVO

Brand: THERMOROSSI Pages: 56

Brand: Viadrus Pages: 24

Brand: HAAS + SOHN Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands