© EUROHEAT DISTRIBUTORS (H.B.S) LTD. June. 2010
Instructions Part Number IN1180 Ed D1
22
ACME
Getting Started With Coal
(Solid mineral fuel)
Having learned where to find the controls, you are now ready to light
a coal fire in the insert, without filling the insert or neighbourhood
with smoke. To light the fire with wood you will need two pieces of
newspaper, a small bundle of kindling wood, and smokeless coal.
Remember that your insert needs your help to gently push start it in the
right direction until it warms. Do not expect it to be on auto pilot until it
reaches its operating temperature.
Ensure the ash pan is fitted and empty,
then securely close the ash pit door.
If the fire is to be lit using paper and wood, set the Plexus control
to maximum air volume and the air direction lever to mid position,
supplying air above and below the grate.
Lightly crumple two tabloid sized pieces of newspaper and
lay them in the middle of the grate.
Resist the temptation to use more paper than this, or
to crumple it too tightly; doing either will prevent the
rapid development of flames and will cause smoke to be
produced.
