E-Drive sur CF80 en Anglais
UCF-000R001-GB
F.M:08/14
p: 41/41
SIMPLIFIED USE OF THE
CONTROL BOARD
The screens below vary depending on oven type
User menu (Check : Programming instructions)
Set temperature reached - green
Set temperature unreached - red
Baking time countdown
Fan operation
Electric oven :
With speed drive : 0-1-2---10
Without speed drive option : 0=Yes 10=No
Gas or Fuel oven : 0=Yes 10=No
Access to the fast modification of the cycle in progress
Operating principle
Baking starting
Stop of the baking
Low speed hood
High speed hood
Exhaust vent open
Exhaust vent (damper) closed
No steam injection in progress
Steam injection in progress
Go back to the previous page
Current error : access to the errors list
Programm activated
Programm not activated
Control board starting-up
Regulator stop (The icon is not visible during a baking)
Light ON
Light OFF
Weekly programming
Access to the parameters according to the authorization level
For all programs
except
«MANUAL»
For the program
«MANUAL»
Recipes programming
Date and Time adjustments
Time for Hood starting before end of baking
Setting of the unused time of the regulator before engaging the
power save mode
Energy saving set T°
Dur.exhaustBef.end smell abs.
Set temperature display
Delay before light
Settings : Parameters suitable for all recipes
Setting of the regulator parameters
Language
Access level
Buzzer Volume
Brightness of the screen
Delay before screensaver
Beep keys
Heating power
Weekly programming
Installer menu (Restricted access for after-sales service)
Manufacturer menu
(Restricted access for after-sales service)
if : Preheating in progress :
1 + 2 + 3
MANUAL
Baking T°
Phase time
Steam inject. time
Fan control
Damper bef. end
Full power control
MANUAL
MANUAL
Preheating T°
Number of phases
Next phase
if : Baking in progress :
2
(Phase in progress)
1
2
3
Access to the recipes list :
96 recipes spread over 10 pages
+ 3x CONTINUOUS BAKING
Smells absorption
Energy saving
OUT OF BAKING
