E-Drive sur CF80 en Anglais
UCF-000R001-GB
F.M:08/14
p: 27/41
DO NOT TOUCH THE
APPLIANCE
BEFORE ANY WORK ON ELECTRICAL
PARTS, CUT OFF THE SUPPLY TO
THE APPLIANCE AT THE EXTERNAL
DISCONNECTING SWITCH.
BEWARE OF CAPACITOR VOLTAGE
TO DISCONNECT THE
APPLIANCE FROM THE
ELECTRIC PLUG,
NEVER PULL THE
WIRE.
WITH A WET PART OF
THE BODY.
IF YOU ARE
BAREFOOT.
BEFORE EACH INTERVENTION ON ANY BURNER OR EVACUATION COMPONENT CUT OFF ITS
SUPPLY AT THE EXTERNAL FEED VALVE.
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any
pressure testing of that system at test pressure in excess of 1/2 psi (3,5 kPa). The appliance must be isolated from the
gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply
piping system at test pressure equal to or less than 1/2 psi (3,5 kPa).
All work on the equipment must be done by a qualified and certificated staff.
In case of false alarm of safety system, it is essential to contact your distributor.
WHAT TO DO IF IT SMELLS GAS ? :
1) Do not try to light any appliance.
2) Do not touch electrical switches; do not use any phone in your building.
3) Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's instructions.
4) If you cannot reach your gas supplier, call the fire department
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
BEFORE ANY WORK ON THE EQUIPMENT
