25
Steam emission
- To steam-iron push the steam button (11) on the iron.
Warning:
The steam emitted is very hot. Danger of scalding!
Note:
The appliance may give out some smoke when
using it for the first time. It is a technical phenomenon that
will cease after a short while.
IB 40 COMPACT START UP
- Plug the power supply cord into its socket.
- Place the iron on the iron rest pad.
- Switch the equipment on using the power on/off switch. The control warning light
integrated into the iron will be on and remain on. This will switch off as soon as
the iron soleplate reaches the required temperature. The iron heating time is about
3-5 minutes. The power on/off switch also activates the ironing board and the steam
generator. An integrated thermostat constantly controls the board heating
temperature. During the heating phase the equipment may emit noises.
This is a normal phenomenon, which is nothing to worry about.
- As soon as the «steam ready» warning light is on the pressure is reached and the
steam generator is ready for use. The heating time of steam generator is about 10
minutes and can be reduced by using lukewarm tap water.
Steam ready light
Low water light
Power on/off switch
power indicator light
Selector switch
W
oo
l C
ott
on
Lin
en
M
AX
+
O
FF
MIN-
N
yl
on
Si
lk
steam emission
position
INSTRUCTION FOR USE IB 40 COMPACT GREEN
- To steam-iron all fabrics, set the temperature
control (10) to the steam emission position.
Summary of Contents for 3109975.0
Page 2: ...2...