NVIDIA Video Driver Controls
C - 16 Display Devices
C
Display Devices
Note that you can use an HDMI (High-Definition Multimedia Interface) cable con-
nected to the HDMI-Out port and/or Mini DisplayPort compatible cable connected
to a Mini DisplayPort 1.2 to connect an external display. You can also use the Thun-
derbolt Port connected to a compatible display device (see below). See your external
display device’s manual to see which formats it supports.
You will need to enable Thunderbolt support in the BIOS
“Intel(R) Thunderbolt Technol-
ogy (Advanced Menu > Intel(R) Thunderbolt)” on page 5 - 10
. You can also set the
level of security for the Thunderbolt port in the BIOS. If you want to use the Thunderbolt port to sup-
port display devices then you will need to set the security level to support display devices only
“Se-
curity Level (Advanced Menu > Intel(R) Thunderbolt)” on page 5 - 11
.
If you want
to use the Thunderbolt port for display then you must set this as the security level, and Mini
DisplayPort2
(
in
Figure 1 - 13 on page 1 - 21
)
will then be turned off
.
Display Mode
Description
Single
One of the connected displays is used as the display device
Clone
Clone simply shows an exact copy of the Primary display desktop on the other
display(s). This mode will drive multiple displays with the same content
Extend
Extend treats connected displays as separate devices, and they act as a virtual
desktop resulting in a large workspace. When enabled, you can drag any icons or
windows across to the other display desktop. It is therefore possible to have one
program visible in one display, and a different program visible in the other display
Sound Blaster
Audio & HDMI
Connection
Note that Sound Blaster
audio will be disabled
when you are connect-
ing to an external dis-
play through an HDMI
connection.
Table C - 1
Display Modes
4
Summary of Contents for SKY X9
Page 1: ...EUROCOM SKY X9...
Page 2: ......
Page 20: ...XVIII Preface...
Page 212: ...Modules 6 72 6...
