manualshive.com logo in svg

EUROCOM SKY X9, User Manual

Share
Download
EUROCOM SKY X9 User Manual Download Page 197

Modules

Intel® Rapid Storage Technology 6 - 57

6

Intel® Rapid Storage Technology Help

If a hard drive member of a RAID volume is reported as “

Degraded

” or “

Failed

” it

may be possible to recover the volume. If the volume cannot be restored then you
will need to recreate the RAID volume and restore the data from a back up. Click the

Help

 menu (or press 

F1

) for instructions on how to recover or recreate RAID Vol-

umes.

Help

Click the 

Help

 (or press

F1

) menu button at the

top of the 

Intel® Rapid

Storage Technology

application.

Click 

Contents

 to view

the general list of sub-
jects covered, click 

In-

dex

 or 

Search

 for a

more specific help top-
ics on a particular item.

Click 

More help on this

page

 at the bottom of

any page for page spe-
cific help.

Figure 6 - 39

Intel

®

 Rapid 

Storage 

Technology

 Help

Summary of Contents for SKY X9

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands