EUROCOM NIGHTSKY RX15, User Manual, Page: 23 / 35

22
English
LED Mode - Keyboard
Click Keyboard , on the left under LED Mode , to set in-
dividual color settings for any keyboard keys you may
wish to highlight.
Simply click to highlight any keys to which you wish to
apply the color, and then click a color from the swatch to
apply the color. To highlight further keys first click to de-
select any previously selected keys, then repeat the above
procedure. To clear settings click
Restore .
Figure 14 - LED Mode (Full Color “Per Key” LED Key-
board)
LED Mode - Keyboard Effect
Click on Keyboard Effect (under LED Mode ) and then
click any of the Effect buttons to view the effects on the
keyboard. You can also adjust the
LED Speed for the ef-
fects from the buttons on the right. Some effect colors can
set to
Random or Custom .
Table 7 - Keyboard Effects (Full Color “Per Key” LED Key-
board)
KB Sleep Timer
Enable and then select the amount of time for which the
system is idle before the keyboard LED enters sleep mode
(i.e. the LED keyboard illumination will turn off to save
power).
KB Brightness
Click on any of the numbers ( 1 - 4 ) on the KB Brightness
bar to set the brightness level of the keyboard. You can
also turn the keyboard backlight off by clicking the
OFF
button, or by using the Fn plus key.
Wave Breath
Scan Blink
Random Ripple
Snake