32
English
Trusted Platform Module
Before setting up the TPM functions you must initialize
the security platform.
Activating TPM
1. Restart the computer.
2. Enter the
Aptio Setup Utility
pressing
F2
during the
POST
.
3. Use the arrow keys to select the
Security
menu.
4. Select
TPM Configuration
and press Enter.
5. Select
TPM Support
and press Enter. Select
Enable
and
press Enter.
6. Select
TPM State
, press Enter and select
Enable
to change
the TPM state to enabled. You will then need to press
F4
to
save the changes and restart the computer.
7. As the computer restarts press
F2
to enter the BIOS again and
go to the
TPM Configuration
menu.
8. Select
Pending TPM operation
, press Enter and select the
option you require (if you are initializing TPM you should select
Enable Take Ownership
). You will then need to press
F4
to
save the changes and restart the computer.
9. You can now
install the TPM driver
and then initialize the TPM.
TPM Driver Installation
1. Click
Option Drivers
(button).
2. Click
5.Install TPM Driver > Yes
.
3. Click
Install
> Next
.
4. Click the button to accept the license and click
Next
.
5. Click
Next
> Next > Install
.
6. Click
Finish
> Yes
to restart the computer.
If you have installed the driver without enabling and acti-
vating the TPM first, a confirmation message will appear
on restart.
Press
F10
to enable and activate the TPM. However it is
recommended that you enter the BIOS and take ownership
of the TPM before configuration in
Windows
. Alternative-
ly press
Esc
to continue without making changes the
TPM.
Summary of Contents for M224
Page 1: ......