19
Engl
ish
Viewing Angles
The emitter’s
horizontal
viewing angle is
100 degrees
.
The emitter’s
vertical
viewing angle is
75 degrees
.
Figure 12 - Emitter - Viewing Angles
Set Up Stereoscopic 3D
After the NVIDIA driver has been installed you can setup
NVIDIA 3D Vision.
1.
Click
Start
, and click
Control Panel
(or point to
Settings
and
click
Control Panel
).
2.
Double-click
NVIDIA Control Panel
(click "
Classic View"
from
the left of the menu if you are in
Control Panel Home
).
3.
Double-click
Stereoscopic 3D
(if the sub-menus are not
visible)
,
and then click
Set up stereoscopic 3D
.
4.
Click
Enable stereoscopic 3D
(tickbox) to enable 3D Vision.
5.
Click
Apply
to save the setting.
6.
Select the drop-down menu at the bottom of the screen to
Test
sterescopic 3D
.
7.
Select
Run Setup Wizard
from the drop-down menu (you can
also select
Run Medical Image Test
from this menu).
8.
Follow the on-screen instructions to set up 3D Vision and click
“
Next
” to progress through the steps (this notebook has a built-
in emitter).
9.
During the setup procedure you will need to click to answer
questions on what you see in 3D on the screen.
10. Configure the stereoscopic 3D from the control panels (make
sure you charge the 3D shutter glasses by plugging them into
one of the computer’s USB ports using the USB cable
provided).
11. The stereoscopic depth may be adjusted by using the control
panel slider.Click
View Compatibility With Games
to check 3D
support for any games
75
Figure 13
Set Up
Stereo-
scopic 3D
Enable sterescopic 3D
Summary of Contents for M224
Page 1: ......