manualshive.com logo in svg

EUROCOM 8500 DeskNote, User Manual, Page: 78 / 100

Share
Download
EUROCOM 8500 DeskNote User Manual Download Page 78

Power Menu 

 

Item 

Setting/Option 

Function 

Enable 

Enable Power 
Saving 

Disable 

Enable/Disable all power 
saving features. 

Enable 
 

Low Power 
Saving 

Disable 

Enable/Disable the power 
saving to its lowest which 
results in max. performance 
but shortest battery life. 

Enable 
 

Medium Power 
Saving 

Disable 

Enable/Disable the power 
saving to its medium which 
results in both moderate 
performance and battery life. 

Enable 
 

High Power 
Saving 

Disable 

Enable/Disable the power 
saving to its highest which 
results in min. performance 
but longest battery life. 

Always on 

30 sec 

1 min 

1.5 min 

Disk Standby 

2 min 

The hard disk will be put on 
standby if it is not accessed 
within the specified period.  
Hard disk power will be 
restored when the disk drive 
is accessed again. 

Always on 
1 min 
2 min 
4 min 
6 min 
8 min 
12 min 

Customize 

Global Standby 

16 min 

The system power will be 
reduced if the system has 
been idled for the specified 
period.  System power will 
be restored when any 
system activity is detected. 

 
 
 

3-16 

User’s Manual 

Summary of Contents for 8500 DeskNote





































































































Reviews:

No comments