manualshive.com logo in svg

EUROCOM 8500 DeskNote, User Manual, Page: 25 / 100

Share
Download
EUROCOM 8500 DeskNote User Manual Download Page 25

Rear View 

 

 
 
 
 

 
 
 
 

 
 

 
 
 
 

 
 
 

 
 

 
 

 
 

AC-in Socket 

Plug the AC adapter into this connector for power supply.  To 
disconnect the power adapter, pull the plug (not the cord) 
directly back. 
 

Security Connector 

It is used to protect your Notebook from being stolen.  Wrap 
the steel cable around your desk.  Next, insert the locking 
device into this security connector. 
 

Parallel Port 

This parallel port supports EPP (Enhanced Parallel Port) and 
ECP (Extended Capabilities Port) modes. 
 

S-video Jack 

Use this jack to transmit video signal to a TV set.  You may 
need to select the video standard (NTSC/PAL) for video 
display (please refer to Chapter 3, Components Menu for 
more information). 
 

RCA Jack 

This jack accepts analog composite signals inputted into the 
system from external video devices, e.g. camera, CCD. 
 

Expansion Port 

This port is used to connect the proprietary Port Replicator. 
 

Dual USB Ports 

The dual Universal Serial Bus (USB) ports simplify the 
expansion capability for peripheral devices. 
 

Serial Port 

This port is UART 16C550 compatible.  It features a 9-pin 
connector to connect an external mouse for example. 

Chapter 1: Getting Started 

1-13 

Summary of Contents for 8500 DeskNote





































































































Reviews:

No comments