Troubleshooting
7 - 20 Printer
7
The
operation mode
for the
parallel por
t set in the BIOS doesn’t correspond with the
mode your printer can work with.
The default operation mode for the parallel port (
ECP
) is
backward compatible with other operation modes used by older printers and will usually
not need to be changed. However some very old printers may require specific settings.
Please check your printer manual to find out which mode your printer uses. Check that the
settings in the BIOS (see
“I/O Device Configuration (Advanced Menu)” on page 5 - 11
)
correspond with those indicated in your printer manual.
Problem
Possible Cause - Solution
Summary of Contents for 5600D Monte Carlo
Page 1: ......
Page 175: ...Troubleshooting 7 24 7...
