Instruction Manual
AirSanitizer
V12-20.0
13/28
1. The mounting bracket supplied loose (see
) is to be fixed to the rivet nuts at the
rear of the AHUs blow out hood in exact alignment using the enclosed fixing screws (see
), see
2. Move the rear of the AHU to the wall and align it horizontally.
3. The mounting bracket must be fixed firmly to the wall with suitable fixing material (screws
. Fixing material is not included in the scope of
supply. The fixing material must be suitable for the wall conditions; consult your local spe-
cialist retailer.
4. The mounting bracket leaves a small distance to the wall so that the ON / OFF switch at the
rear of the AHU is accessible.
5. Check that the fixing material is firmly fixed.
6. Check the stability of the AHU.
Figure 5:
Mounting bracket (supplied loose)
Figure 6:
Fixing screw for mounting bracket
Figure 7:
Assembly of the mount-
ing bracket on the AHU
Figure 8:
Assembly of the mounting
bracket to the wall
Figure 9:
Correctly mounted AHU in
the room
4.3 Foundation
Following conditions must be fulfilled:
-
The AHU must be placed on a stable surface.
-
Ensure that the surface is level.
NOTICE!
Attention!
If these structural conditions are not met, this may be the cause of a jammed door
and other problems with the AHU.
