Euroclima AirSanitizer, Instruction Manual

Page: 12 / 30

Instruction Manual
AirSanitizer
V12-20.0 11/28
-
Before further lifting, check by visual inspection that no conspicuous defor-
mations can be detected on the suspension means.
-
Avoid jerky lifting.
-
Loads must be picked up and set down in such a way that unintentional over-
turning, falling apart, sliding or rolling of the load is avoided.
-
Due to the dimensions and weight of the AHU (see chapter 1.5.2 (Technical
data) , the transport and unloading of the AHU must be carried out jointly by at
least 2 qualified persons.
-
Personal protective equipment: safety shoes must be worn during transport
and unloading.
3.2.2 Transportation by forklift / lift truck
WARNING!
Danger due to loss of stability of the AHU
During transport and unloading, there is an increased risk of the AHU tipping over
due to its high center of gravity. Therefore, if possible, transport the AHU lying on
the pallet, see
Figure 2 . If this is not possible, the AHU must be secured against
tipping with additional measures provided by the customer. When unloading and
setting up, secure against slipping and tipping over until the AHU is fully assem-
bled.
Each AHU is delivered on its own pallet and can be unloaded using a forklift and transported using
a forklift or pallet truck. In principle, force may only be applied through the pallet, see
Figure 2 .
Figure 2: Correct transport Figure 3: Incorrect transport
The center of gravity must be centrally located between the forks (see
Figure 4 ).