Control Systems Technology
www.anemometer.co.za
Barometric
When user select the barometric display, the anemometer will measure and update the barometric
every 3 seconds in the first 3 minutes. After 3 minutes, the updating interval becomes 1 minute. And
the ABS/REL altitude will be calculated based on barometric values.
Note: The barometric will show
” --.-” if the barometric is out of the range 600-1100hPa.
Note
:
If no button operation within 24 hours under altitude mode, it power off automatically.
8. SET Mode
Press and hold the
“
SET
” key for 2 seconds to enter the setting mode.
(1) The wind speed unit will display and flash. Press
“
+
” key to cycle among m/s, Km/h, mph, Knots
and ft/min. Press
“
SET
” key to confirm and advance to the next step.
(2) The temperature unit will begin flashing. Press
“
+
” key to cycle between °C and °F. Press “
SET
”
key to confirm and advance to the next step.
(3) The barometric unit will begin flashing. Press
“
+
” key to cycle among hPa, inHg, mmHg. Press
“
SET
” key to confirm and advance to the next step.
(4) The altitude unit will begin flashing. Press
“
+
” key to cycle between m, feet. Press “
SET
” key to
confirm and advance to the next step.
Set Wind speed unit Set temperature unit Set barometric unit
Set altitude unit
Long press the
“
SET
” key to exit the Setting mode and enter to measuring mode. Press and hold the
“
SET
” key for 4 seconds can enter the Power Off status,
Note:If no key operation in 15s, the unit will return to the normal mode automatically.
9. Other features
9.1 Beaufort wind scale (bft)
The Beaufort scale is displayed in bar graph (0-12). This is a system for estimating wind force
without the use of instruments based on the visible effects of the wind on the physical environment.
