Control Systems Technology
www.anemometer.co.za
5. Display Sections:
The display is divided into 2 sections as below figure shows:
6. Function keys:
The anemometer uses the following keys:
6.1 SET key:
In normal mode, press this key to toggle between Wind speed/Altitude modes.
In setting mode, press this key can change set item, if now set the last item, then press this
key to out of setting mode.
Press the key for 2s to enter the setting mode (default set item is wind speed unit)
Press the key for 4s to power off the unit. Press the key for 2s again to power on the unit.
6.2 LIGHT key
:
In the wind speed mode, press to toggle between temperature/wind chill
In the Altitude mode, press to toggle between barometric and temperature.
Press the key for 2s to turn on the backlight for 8s.
6.3 + key:
In wind speed mode, press it to change the display current WIND (default)
→maximum
WIND →Average WIND.
In wind speed mode, hold this key for 2 seconds, current/Max/Average wind speeds will be
cleared.
In the Altitude mode, press it to change the display Current Relative Altitude (default)
→Maximum Current Altitude →Absolute Altitude.
When display the Current Relative altitude, hold the key for 2 seconds, the current altitude
can be set as
“0”.
When display the Maximum Relative Altitude
，
hold the key for 2 seconds, the Maximum
Relative Altitude will be cleared.
7. Wind Speed& Temperature vs. Altitude& Baromtric display
Pressing the
“SET”
key to toggle between wind speed and altitude display
7.1 Wind Speed& Temperature Display Mode
7.1.1 Wind Speed Display
There are three wind speed display modes:
Current wind speed (WIND)
Maximum wind speed (ΔWIND)
Average wind speed ((ΦWIND)
Sub display: 1.display temperature/wind chill under
wind speed mode. 2. Display barometric and
temperature under Altitude mode.
Main display: Wind speed/Altitude display modes
