These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by
any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. These ope-
rating instructions represent the technical status at the time of printing. Changes in technology
and equipment reserved.
© copyright 2013 by conrad electronic se.
to mAke A dcF recePtion AttemPt
-
To perform a manual search for the DCF signal (e.g., if you have placed
the radio alarm clock in a different location), remove the battery.
-
Insert the battery again after about one minute.
-
This will start a new reception attempt. Then, as described above, wait
for a few minutes until the correct time is displayed.
AlArm Function
a) setting the alarm
-
The alarm time is indicated on the clock face with a small red clock
hand.
-
Turn the adjustment wheel on the housing‘s rear in the arrow direction
until the required alarm time is shown on the clock face.
Turn the adjustment wheel only in the direction of the arrow;
otherwise, the alarm time will not be set precisely or the clock
mechanism might be damaged.
b) Activating/deactivating the alarm function
-
Move the alarm switch on the side of the housing to the desired posi-
tion:
red surface visible
alarm function activated
red surface not visible
alarm function deactivated
c) stopping the alarm signal & snooze function
-
At the set alarm time, an alarm signal will sound and the clock face is
illuminated for a few seconds. The alarm signal can be interrupted for
approx. 5 minutes by briefly pressing the snooze key on the top of the
housing. After this, the signal will restart (snooze function).
-
This procedure can be repeated up to six times.
-
To switch off the alarm completely, move the alarm switch on the side
of the housing in the position where the red surface is not visible.
-
If the alarm signal is not switched off manually, it will switch off auto-
matically after about two minutes and will sound again after 12 hours.
illuminAtion
Press the snooze key on the housing’s top side to turn on the lighting of
the clock face for a few seconds.
locAtion For use
Select a level, flat and stable location for use.
Protect valuable furniture surfaces by using an appropriate underlay;
otherwise, it may cause scratches.
Set up the radio-controlled alarm clock to prevent it from falling.
To ensure correct DCF reception, the radio-controlled alarm clock should
not be placed next to electronic devices, cables, metal parts, etc.
mAintenAnce And cleAning
The product does not require any maintenance and should never be disas-
sembled for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use any chemical cleaning agents, as they can discolour the plastic
casing.
disPosAl
a) Product
Electronic devices are recyclable waste materials and must not
be disposed of in the household waste!
Dispose of an unserviceable product in accordance with the
relevant statutory regulations.
Remove the battery if there is one inserted and dispose of it
separately from the product.
b) normal and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return
used batteries and rechargeable batteries. Do not dispose of used batter-
ies in the household waste!
Batteries/rechargeable batteries contain harmful materials and
are labelled with the symbol shown to indicate that disposal in
the household waste is forbidden. The symbols of the relevant
heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking
can be seen on the battery/rechargeable battery, e.g. under-
neath the refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge
at the official collection points of your community, in our stores, or at
places where batteries or rechargeable batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protec-
tion of the environment.
technicAl dAtA
Operating voltage ................ 1.5 V/DC
Battery ................................... 1 x 1.5 V Mignon cell (AA)
Battery life ............................ approx. 2 years
Time protocol ....................... DCF
Dimensions ........................... 101 x 103 x 55 mm
Weight .................................... 120 g
declArAtion oF conFormity
We, Conrad Electronic, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby de-
clare that this product adheres to the fundamental requirements and the
other relevant regulations of Directive 1999/5/EC.
The Declaration of Conformity for this product can be found at
www.conrad.com
