manualshive.com logo in svg

EUROCHEF COKOVNEUCA608, User Manual

Share
Download
EUROCHEF COKOVNEUCA608 User Manual Download Page 18

 18

 

8.3 Connecting the cooktop to the mains power supply

 

 

Important! 

•This cooktop must be connected to the mains power supply only by a suitably qualified 

person. 

•This cooktop must be earthed. 

•Before connecting the cooktop to the mains power supply, check that: 

1.the domestic wiring system is suitable for the power drawn by the cooktop 

2.the voltage corresponds to the value given on the rating plate 

3.the power supply cable sections can withstand the load specified on the rating plate. 

•To connect the cooktop to the mains power supply, do not use adapters, reducers, or 

branching devices, as they can cause overheating and fire. 

•The power supply cable must not touch any hot parts and must be positioned so that its   

temperature will not exceed 75

o

C at any point. 

• The power of the main supply cable must be bigger than the rated power of the hob.

                 

 

                                                  terminal block

 

 

Summary of Contents for COKOVNEUCA608























Reviews:

No comments

Brands by name

Popular brands

Load more brands