35
EN
II-B. Description
(multi-temperatures model S059 - S259)
O
N
F
C
E
D
C
B
A
G
H
I
M
L
K
J
A
Lighting mode
B
Door open alarm
C
Temperature zone concerned
D
Fault sensor alarm
E
Temperature alarm
F
Carbon filter alarm
G
Validation and settings access button
H
Selection and adjustment buttons
I
Lighting mode validation and access button
J
Carbon filter counter log access button
K
Power button
L
Highest cabinet temperature display
M
Hot circuit indicator light
N
Cold circuit indicator light
O
Lowest cabinet temperature display
III-B. Temperature settings
5 sec.
Press the
key for 5 s to activate.
1
Press the
key about 5 s.
The display starts to flash.
3
Press the
button to validate.
The right-hand display is flashing.
4
Press the
or
keys set the temperature of the upper section
of the cabinet
5
Press the
button to validate.
2
Press the
or
keys to set the temperature of the lower
section of the cabinet.
•
The default setting for the lowest temperature range is 8 °C (46 °F).
However, this setting can be adjusted between 5 and 12 °C (41° and
54 °F).
•
The default setting for the highest temperature range is 18 °C (64 °F).
However, this setting can be adjusted between 15 and 22 °C (59° and
72 °F).
WARNING:
to operate correctly your cabinet should be located in a
room with a temperature between 12 and 35 °C (54° and 95 °F).
The value on the display is the actual temperature inside the
cabinet, it is therefore necessary to wait before your new setting
takes effect.
Recommended setting range for the lowest temperature: 7 to 9 °C (45° to 48 °F).
Recommended setting range for the highest temperature: 17 to 20 °C (62° to 68 °F).
The touch keys are very sensitive. There
is no need to push the keys very hard. A
simple, gentle touch is enough to
register the setting. Think to lift your
finger from the control panel between
each touch.
6 - C
OMMISSIONING
YOUR
WINE
CABINET
Summary of Contents for Gamme Compact 5
Page 2: ......
