5
3.
Avoid accidental starting. Be sure the switch is off before plugging the stand in. Carrying a
magnetic drill stand with your finger on the switch or plugging in a magnetic drill stand that
has the switch on increases the change of accidents;
4.
Never place hands, fingers, gloves or clothing near drilling area or rotating machine parts;
5.
Remove adjusting keys or switches before turning the power on. A wrench or a key that is
left attached to a rotating part may result in personal injury;
6.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
enables better control of the drill stand in unexpected situations;
7.
Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard
hat and hearing protection must be used for optimal safety;
8.
Always use supplied safety chain during any work on non-horizontal surfaces. Magnetic drill
stand can release from surface.
When using this magnetic drill stand, you MUST wear ear and eye protection.
Use and care
1.
When using the drill stand on non-horizontal surfaces, you must use cutting paste. Do not
use oil because the oil can drip into the unit;
2.
During operations, the drill you are using must be cooled and lubricated with good quality
cutting or lubrication oil;
3.
Use clamps or other practical solutions to secure and support the workpiece to a stable
platform. Holding the workpiece by hand or against your body is unstable and may lead to
loss of control;
4.
Do not use the drill stand when the switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired;
5.
Disconnect the plug from the power source before making any adjustments, changing
accessories or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally;
6.
Store your magnetic drill stand out of reach for children and other untrained persons. Tools
are dangerous in the hands of untrained users;
7.
Maintain your drill stand with care. Keep cutting tools sharp and clean. Properly maintained
tools, with sharp cutting edges are less likely to break and are easier to control;
8.
Check for misalignment of moving parts, breakage of parts and any other condition that may
affect the operation. If you detect damage have the drill stand serviced before use. Many
accidents are caused by poorly maintained tools;
9.
Only use accessories that are recommended by Euroboor for your model. Accessories that
are suitable for one machine may become hazardous when used on another machine.
Service
1.
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in risk of injury;
2.
When servicing a tool, use only identical replacement parts. Follow instructions in the
maintenance section of this manual. Use of unauthorised parts or failure to follow
maintenance instructions may create a risk of electric shock or injury;
3.
Euroboor offers Armature kits containing official Euroboor spare parts suitable for your
magnetic drilling machine.
Summary of Contents for F16+
Page 23: ...23 8 Exploded views spare parts list 8 1 Exploded views ...
Page 24: ...24 ...
Page 26: ...26 8 3 Wiring diagram ...
