11
3. Preparation & adjustment
3.1 Assembly
WARNING:
To reduce the risk of injury, turn unit off and disconnect machine from power
source before installing and removing accessories, before adjusting or changing set- ups or
when making repairs. Be sure all switches are in the OFF position. An accidental start-up can
cause injury.
FITTING THE FEED HANDLES
1.
Fit each of the three feed handles by screwing them into the hub in clockwise directions
2.
Tighten firmly by hand
The handles are supposed to face slightly outward. Be careful not to cross-thread any of the
components.
FITTING THE SAFETY CHAIN
1.
Pass the safety chain through the frame grip opening
2.
Wrap the chain around the work piece
3.
Securely close the chain using the lock
WARNING:
Always use the safety chain when using machine vertically and/or up-side-down.
www.fnglob.pl
