Euroboor ECO.32 User Manual Download

Page: 4 / 23

ISSUE 1/Original version/OCT 2013

Symbol

Term, meaning

Explanation

Read documentation

Be absolutely sure to read the enclosed
documentation such as the Instruction Manual and
the General Safety Instructions.

Wear ear protection

Use ear protection during operation.

Wear eye protection

Use eye-protection during operation.

Danger/warning/caution

Observe the information in the adjacent text!

European conformity symbol

Confirms the conformity of the power tool with
the directives of the European Community.

Class of protection I

Product with basic insulation and exposed
(touchable), conductive parts additionally
connected to the protective earth conductor.

Millimeter

Unit of measure for length, width, height or depth

Kilogram

Unit of measure for the mass

Volt

Unit of measure for the electric voltage

Ampere

Unit of measure for the electric current intensity

Watt

Unit of measure for the output

Newton

Unit of measure for the force

min

Minutes

Unit of measure for the time

No-load speed

Revolution speed at no-load

1/min

per minute

Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute.

Summary of Contents for ECO.32
























Search results

Summary of Contents for ECO.32

Reviews:

Related manuals for ECO.32

Brands by name

Popular brands

Euroboor ECO.32, User Manual

Search results

Summary of Contents for ECO.32

Reviews:

Related manuals for ECO.32

Brands by name

Popular brands