Euroboor ECO.30S+, User Manual

Page: 19 / 32

19
Automatic shut-off
As additional protection, when the carbon brushes are actually worn to a level where replacement is
needed, the motor will shut off automatically. This prevents the armature from being damaged.
During automatic shut-off, the carbon brush wear indicator is not lit.
For replacement of carbon brushes, see chapter 6. Maintenance.
4.7 Tool lubrication
In horizontal applications
In order to use the lubrication system, the tank must be filled with a cutting lubricant.
1. Make sure the flow regulator is closed;
2. Unscrew the cap;
3. Fill the container with cutting lubricant;
4. Screw the cap back on.
•
Adjust the fluid flow as required using the flow regulator;
•
Add more cutting lubricant when the shavings (metal chips) become blue.
Vertical and overhead applications
Dip the cutter in cutting paste or apply an appropriate spray.
WARNING: Do not use the lubrication system in vertical or overhead drilling applications.
Instead use Euroboor cutting paste.
Make sure to use only suitable cutting lubricants. Euroboor offers a wide range of cutting lubricants
for all tool and material combinations. Proper lubrication will help you create better and faster
results, and extend the lifetime of your tools.