19
INSTRUCTIONS FOR THE USER
F
OVEN DOOR REMOVAL
The oven door can be removed to give easier access to
the oven when cleaning. To remove, proceed as follows:
• Open the oven door and insert rivet or nail (R) in the
hole (F) of the hinge (ig. E).
• Partially close the door, forcing it upwards at the
same time to free stop tooth and hinge sector.
• Once the hinge is free, pull the door forwards tilting
it slightly upwards to free sector.
• To reassemble proceed in the reverse order,
paying attention to the correct position of sectors.
HOW TO CLEAN THE INNER OVEN DOOR GLASS
(only certain versions)
One of the features of our cookers is that the inner
oven door glass can be easily removed for cleaning
without the aid of specialized personnel. Just open the
oven door and remove the support securing the glass
(ig.
F).
ATTENTION!! This operation can be done also
with the door itted on appliance, but in this
way, pay attention that when the glass is pull
upwards, the force of the hinges can close the
door roughly.
E
REPLACING THE OVEN LAMP
WARNING:Ensure the appliance is switched off
before replacing the lamp to avoid the possibility
of electric shock..
In the event one or both oven lamps need replacing, the
new lamps must comply with the following requisites:
15 W - 230 V~ - 50 Hz - E 14 - and must be resistant
to high temperature (300°C).
The appliance can have two different types of lamp
holder:
•
Lamp holder type 1 (ig.13A)
: Draw out the side
guide rails as described above.Then, remove the
glass protection cap (V) from the bulb socket, lifting
it with a screwdriver placed between the cap and
the oven wall and replace the lamp (L). Fit the
accessories back in reverse order.
•
Lamp holder type 2 (ig.13B):
Turn glass protection
cap (C) counterclockwise and change the lamp (L).
Re-it the cap, screwing it back in a clockwise
direction.
1 3 B
1 3 A
