3
PART 2: WARNINGS
BEFORE STARTING TO USE THE APPLIANCE, PLEASE TAKE ALL ESSENTIAL
SAFETY MEASURES AND THROUGHLY READ THE USER MANUAL
This
appliance has been designed for domestic use as built-in furniture.
After removing the packaging, make sure to check if there is any damage to the appliance.
If there is any damage, never attempt to use the appliance and immediately contact your
Authorized Service. As packaging materials need to be collected immediately and put out
of reach.
Never leave packaging residues unattended in the home. Seperate the various packaging
materials by type and consign them to the nearest seperate disposal centre.
The appliance must be installed and put in operation by an authorised technician under the
conditions provided by the manufacturer in this manual. The manufacturer cannot be held
responsible for any damage that might occur due to faulty installation.
Before connecting your appliance to the mains at home, make sure to check the conformity
of voltage settings, which are specified on the information sticker attached to the appliance
and/or packaking, with the usage conditions available.
Do not operate the oven before it is fully installed.
Be sure that the supply cable is not wedged during the installation of the appliance.
The supply cable should never be replaced by the customer, in the event any damage
occurs to the supply cable for any reason, please contact your Authorized Service.
Before replacing the oven
lamp
, turn off the power to the appliance.
Switch off the appliance before cleaning, maintenance work etc.
Some parts of the appliance may preserve their heat for a long time; please wait untill the
parts primarily exposed to heat cool off before touching them.
Do not keep flammable items/substances near the appliance while it is in use.
When operating other electrical devices near the appliance, pay attention that their cables
do not come into contact with heated parts.
When the appliance is not in use, make sure that the buttons are in “ 0 “ (off) position.
The cooling fan operates during cooking. Air is expelled through vents between the oven
door and the control panel. The cooling fan may run on after the oven is switched off to keep
the controls cool.This is quite normal.
Always cook with the oven door closed.
