15
Pyrolytic Cleaning
The oven cavity is coated with a special emanel resistant to high temperatures.
During the pyrolytic cleaning operation, the temperature inside the oven can reach about
0
475 C does burning food residuals.
For your security,during the pyrolytic cleaning operation,the oven door automaticly locks.
Upon completion of the cleaning operation the oven door will be locked until the oven
cavity has cooled down.
The cooling fan operates during cooking until the oven has cooled down.After cooking, it is
advisable to remove all the food residues with a wet sponge.
It is advisable to wipe the oven over with a sponge soaked in warm water after each pyrolytic
cleaning cycle is carried out.
During the Pyrolytic operation, some smell will be emanated due to destruction of the food
residual, it is normal.
During the Pyrolytic operation, the room where the oven installed must be ventilated
sufficiently.
4.4. USING THE OVEN PROGRAMMER / DIGITAL TIMER
‘’Auto’’ function
symbol
‘’Minute Minder’’
symbol
‘’Manual operation’’
symbol
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains
supply for the first time, the numbers on the timer
display will flash. Before you can select a cooking
function or set a temperature, you must set the
appliance into “manual operation” mode.
To select manual operation mode, press the
“manual operation” button on the control panel.
Setting the time of day
After setting your oven for manual operation,you should also set the time of day.
Use the “minus” button and “plus” button to adjust the time that appears in the display.
After getting display to the correct time, release the “minus” and “plus” buttons.After 5
seconds the time will fix in the display you will be able to use your oven.
Setting the minute minder function
You are able to set minute minder at any time, regardless of whether an oven function has
been selected.You can set a period of time using the minute minder function and an alarm
will sound when this period of time has elapsed.
Press the “minute minder” button, the display will show a value of 00:00. Set the period of
time that you wish the minute minder to countdown for, by using the “minus”and “plus”
buttons.
