Instruction Manual
EVC-TP-IE358BN3
www.eurovideo-cctv.com
24
If you have trouble setting up or operating the camera, refer to the following.
PROBLEM
SOLUTION
No picture
Check if the power is connected correctly.
Check if all the Cable is connected correctly.
Camera with heat,
Abnormal motion
Black lines on the
screen
Check if the power supply meets standard requirements and
if the power supply changes irregularly
Blinking Screen
Check if the Camera set toward Sun or fluorescent lamp.
Check if the connector of Auto Iris Lens is connected correctly when using.
Unclear Screen
Check if the Lens gets dirty.
You can wipe out with clean fabric or brush.
Check if the monitor is in a condition as following;
If light is coming inside too much,
You can change the angle of Camera or you can adjust back-focus.
No Operation of
Color Auto Mode
Check if you set ‘Color’ mode ‘EXT/ON/OFF’
Check if you set ‘Gain’ mode off.
No operation of
Motion Detection
Check if you set ‘Motion Detection’ mode off
Check if you set ‘MD Level’ too low
Check if you set ‘MD Area’ properly.
No right Color
Check if you set ‘White Balance’ mode correctly.
TROUBLESHOOTING
