４８
circuit for each I/O.
Alarm out contact: transmission method of alarm signal.
Local contact: local alarm out. Default local contact.
Net contact: internet transmission.
Note: The functions requires the synchronous use of digital video management
software, eg. HVMS. Choosing net contact, user is supposed to set the alarm IP as
HVMS-CMS IP. Finishing data set of HVMS, the relay switch can be remotely
controlled. For more details, please refer to HVMS manual.
Alarm IP: set the IP address of the alarm.
User can set each channel signal alarm in or alarm method of each motion
detection: Alarm in 1 (for net contact, the alarm in 1 is ineffective. ), sending emails,
FTP uploading, audio and others. The setting takes into effect after clicking setting
button.
4.3.9 User
User: Administrator
’
s authority to operate the camera.
Picture 4-3-29 add user
Add user: click the image
“
”
, you will get thefollowing dialog:
