Euro Towers 750K Instructions For Use Manual Download Page 11

Maximum distance 

between platforms 

shall not exceed 

2.25m except the 

distance to the first 

platform max 3.40m

Do not bridge be-

tween towers or oth-

er structures Please 

contact Euro Towers 

for information on the 

correct equipment for 

Bridging Towers

Maximum inclination 

for 

movement

. Note 

the maximum angle 

allowed is defined by 

the manufacturer

Do not build, disman-

tle or attempt to work 

on an access tower if 

the wind speed

exceeds 17MPH

Maximum inclination 

for movement. Note 

the maximum angle 

allowed is defined by 

the manufacturer

Do not stand on an 

unguarded platform

Do not lift the tower 

with mechanical 

equipment

Do not use the 

tower for access 

and egress to other 

structures

Do not suspend the 

tower

Do not lift heavy ob-

jects from the tower

Do not move the 

tower with people or 

materials on it

Do not use ladders,box-

es or other objects to 

gain extra height

Do not climb the outside of the tower

DISMANTLE TOWER IN REVERSE EXCEPT WHEN DISMANTLING THE HANDRAILS 

Unclip 4 x Horizontal 

braces from the far end of 

the trapdoor platform.

From a seated position remove 

4 x guardrails making sure you 

never stand on an unprotected 

platform.

From a seated position descend 

down the tower to the next 

platform or ground. Ensure you 

always have collective protec-

tion around you when standing 

on any platform. 

Summary of Contents for 750K













Reviews: