Note
:
Fit the steam pocket frame with the
angle adapter onto the extension tube.
Step 2. If the angle adapter is not
attached to the steam pocket
frame, attach as follows: Hold
the steam pocket frame in one
hand and the
angle adapter in
the other. Insert
the angle adapter
steam into the
opening of the
steam pocket
frame as shown in Fig. 5. Note
that the flat on the nozzle must
face toward the side of the
frame with the brass pin. Once
inserted, rotate it 90°.
Step 3. Insert the electrical power cord
into the outlet. Heating time is
approximately 4-6 minutes with
cold water. Filling the steam
generator with hot water will
shorten the heat up time.
Using Your Steam Cleaner with
Steam Pocket
Step 1. Connect the steam pocket
accessory to the steam handle
with two extension tubes. To
attach the extension tubes one
onto the other or onto the hand
grip, press the locking button
ensuring that it fits into the hole
(Fig. 3., Fig. 4) and press the two
sections together. To disconnect,
repeat the operation by pressing
the locking button and pulling the
two sections apart.
Attaching the Steam Pocket
Towel to the Frame
1. Slide the steam
pocket towel over
the steam pocket
frame. (Fig. 6)
2. Bring the towel all
the way to the top
of the steam
pocket frame.
(Fig. 7)
3. Bring the hook and
latch strips that are
on the back side of
the steam pocket
towel over the
steam pocket frame
and attach to
the inside of the
front side of the
steam pocket towel.
(Fig. 8)
Note:
If replacing the steam pocket
towel, make sure that the steam pocket
frame has been allowed to cool before
removing or attaching a new steam
pocket towel.
Warning:
Always insure the unit is
“
UNPLUGGED
” from the wall receptacle
prior to attaching or removing accessories.
OPERATING INSTRUCTIONS
Fig. 4
6
Fig. 6
Fig. 7
Fig. 8
Fig. 5
Locking Button
Hand Grip
Fig. 3
Using the Trigger Lock
The steam cleaner has a steam trigger
lock that automatically engages when
you depress the steam trigger. (Fig. 2)
To unlock the steam trigger, just press it
in the direction of the hose.
Steam
Trigger Lock
Fig. 2
Care & Maintenance of the Steam
Pocket Towel
Due to the unique cleaning ability of this
cloth, proper care of your micro-fiber towel
is required to ensure long life and
continued cleaning ability.
• The first thing you should do when
you get a new micro-fiber towel is to
wash and dry it. During the
manufacturing process the fabric has a
tendency to become flat as it picks up
contaminants from the air and
machinery. There will also be a number
of loose threads that, while they cause
no harm, can be annoying the first time
you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately
from other fabrics. They have a tendency
to pick up lint and other particles from
other fabrics and the next time you use
your towel, this lint will transfer to the
surface being cleaned.
•
ONLY USE LIQUID DETERGENTS
,
never use dry detergents as many times
the granules do not fully dissolve and
become trapped in the towel. This can
scratch the surface that you are
cleaning.
•
NEVER USE BLEACH OR FABRIC
SOFTENERS
! Bleach will damage the
micro-fiber fabric and fabric softeners
deposit a coating on the micro-fiber
fabric what will not allow the cloth to
clean efficiently.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the micro-fibers to break
down.
• If you wash your towel on a regular basis
and don’t let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your micro-fiber towels.
• As you use the micro-fiber towel, you will
notice that sometimes a thread will
loosen or pull out. This is normal and
you should
NEVER PULL AT THE
LOOSE THREAD
! Pulling the thread can
cause the weave to come undone.
Instead, simply trim the thread with a
pair of sharp scissors.
OPERATING INSTRUCTIONS
Attaching the Accessories to the
Flexible Steam Hose
7
Allow the unit to cool for 5 minutes
before changing accessories.
Window Squeegee
This attachment is very useful for
cleaning large windows, plastic
material, ceramic, tiled or marble
surfaces.
Important
:
When cleaning windows,
always avoid any sudden changes in
temperature to prevent glass
breakage or cracks.
To use
: Connect the window
squeegee to the hand
grip or use with
extension tube for
hard to reach surfaces.
Apply steam abundantly, then remove
excess water and dirt with the glass
wiping edge.
Extended Concentrator
Use the extended concentrator
to clean under toilet rims
and hard to reach places.
To use:
Attach the extended
concentrator to the handgrip or to
the extension tubes.
Caution
:
Be aware of hand placement
and take care not to actuate the steam
discharge switch while installing or
removing accessories.
Nylon Bristle Brush (x2)
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use
: Screw on the nylon
bristle brush on to the end
of the extended
concentrator, which
then may be used directly
on the hand grip or with extension
tubes.
