Euro-Pro 9130C Instruction Manual Download Page 29

Page: 29 / 72

FUNCTION BUTTONS

Stitch width adjustment button

When you select a stitch, the machine will

automatically set the recommended stitch width,

which will be indicated by numbers on the LCD

screen. The stitch width can be regulated by

pressing the stitch width adjustment buttons.
Certain stitches have a limited stitch width.

For a narrower stitch, press the "" button (left).

For a wider stitch, press the "+" button (right). The

stitch width can be adjusted between "0.0-7.0".

Certain stitches have a limited stitch width.

When patterns 01-05 are selected, the needle

position is regulated by the stitch width

adjustment buttons. Pressing the "" button (left),

will move the needle to the left and pressing the

"+" button (right), will move the needle to the right.

The numbers will be changed from left position

"0.0" to extreme right position "7.0". The pre-set

center needle position will be indicated as "3.5".

Stitch width

adjustment button

Stitch length

adjustment button

Mirror button

Mode selection button

Patterns

Summary of Contents for 9130C









































































Search results

Summary of Contents for 9130C

Reviews:

Related manuals for 9130C

Brands by name

Popular brands

Euro-Pro 9130C, Instruction Manual

Search results

Summary of Contents for 9130C

Reviews:

Related manuals for 9130C

Brands by name

Popular brands