Euro-Pro 9130C Instruction Manual Download Page 15

Page: 15 / 72

MATCHING NEEDLE/ FABRIC/ THREAD

NEEDLE, FABRIC, THREAD SELECTION GUIDE

Please Note:

- In general, fine threads and needles are used for sewing fine fabrics, and thicker threads

are used for sewing heavy fabrics.

- Always test thread and needle size on a small piece of fabric which will be used for actual

sewing.

- Use the same thread for needle and bobbin.

Heavy duty thread, carpet thread.

16 (100)

11-14 (80-90)

Medium weight fabrics-cotton, satin,

sailcloth, double knits, lightweight

woollens.

Medium weight fabrics-cotton duck,

woolen, heavier knits, terrycloth,

denims.

Heavyweight fabrics-canvas, woolens,

outdoor tent and quilted fabrics,

denims, upholstery material (light to

medium).

Heavy woollens, overcoat fabrics,

upholstery fabrics, some leathers

and vinyls.

14 (90)

18 (110)

NEEDLE SIZE

FABRICS

THREAD

9-11 (70-80)

Lightweight fabrics-thin cottons, voile,

serge, silk, muslin, Qiana, interlocks,

cotton knits, tricot, jerseys, crepes,

woven polyester, shirt & blouse fabrics.

Light-duty thread in cotton, nylon,

polyester or cotton wrapped

polyester.

Most threads sold are medium

size and suitable for these

fabrics and needle sizes. Use

polyester threads on synthetic

materials and cotton on natural

woven fabrics for best results.

Always use the same thread on

top and bottom.

Summary of Contents for 9130C









































































Search results

Summary of Contents for 9130C

Reviews:

Related manuals for 9130C

Brands by name

Popular brands

Euro-Pro 9130C, Instruction Manual

Search results

Summary of Contents for 9130C

Reviews:

Related manuals for 9130C

Brands by name

Popular brands