71
GB
Fig.1-1 Fig.1-2
b) Insert the big end of the middle suction/blower tube to the blower housing as shown
in Fig.2-1. And fix them in position by the 2 short screws on both sides as shown
in Fig.2-2.
Fig.2-1 Fig.2-2
Fitting wheel assembly
Insert the wheel assembly to the small end of the lower suction/blower tube till the
ribs on tube as shown in Fig 3-1. And fix it in position by the short screw as shown
in Fig 3-2.
Fig.3-1 Fig.3-2
Fitting the collection bag
Before fitting the collection bag ensure that
the selector switch for blow/vacuum (11)
operates smoothly and that it is not obstructed by debris from the previous use. (Fig.
4)
