63
GB
SUPPLY. Do not use the machine if the cord is damaged or
worn.
h) Never operate the machine while people, especially children,
or pets are nearby.
3. Operation
a) Before starting the machine, make certain that the feeding
chamber is empty.
b) Keep your face and body away from the feed intake opening.
c) Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part.
d) Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base of the
machine when feeding material into it.
e) Always stand clear of the discharge zone when operating this
machine.
f) When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign
objects are not included.
g) If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
immediately shut off the power source and allow the machine
to stop. Disconnect the machine from the supply and take the
following steps before restarting and operating the machine:
i. inspect for damage;
ii. replace or repair any damaged parts;
iii. check for and tighten any loose parts.
h) Do not allow processed material to build up in the discharge
zone; this may prevent proper discharge and can result in
kickback of material through the intake opening.
