33
EN
longer possible.
• Keep the product and ventilation slots clean at all times. If the ventilation slots are
blocked, there is a risk of overheating and /or the product being damaged.
• Always clean the product after completion of work.
• Never permit liquids to enter inside the product. Use a cloth to clean the housing. Never
use petrol, solvents or cleansers which can damage the plastic.
• If necessary, clean the saw blade mount with a brush or compressed air.
• If the battery is to be stored for an extended period, the charge level should be checked
regularly. The optimum charge level is between 50% and 80%. The optimum storage
environment is cool and dry.
STORAGE AND TRANSPORTATION
Storage
1. Switch the product off and remove the battery pack
11
.
2. Clean the product as described.
3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
4. Always store the product in a place that is inaccessible to children.
5. During a longer storage period, check the state of charge of the battery and recharge if
necessary roughly every 3 months.
6. We recommend using the original package for storage or covering the product with a
suitable cloth or enclosure to protect it against dust.
7. Regularly check the charge level of the battery pack
11
, if it is to be stored for an
extended period. Optimum storage conditions are cool and dry.
Transportation
1. Switch the product off and remove the battery pack
11
.
2. Always carry the product by its handles.
3. Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
4. Secure the product to prevent it from slipping or falling over.
REPLACEMENT PARTS /ACCESSORIES
Available accessories
WARNING! Only use accessories and additional equipment specified in the
operating manual. Using insertion tools or accessories other than those specific
in the operating manual may cause a risk of injury. Only get the accessories
from the Service Centre.
