36
to jam, check regularly, release the on/off switch and remove the battery pack before
checking.
8. Trim longer grass in stages; do not cut long grass in one cut, for the best result, cut
longer grass in steps.
Tips
♦
For the best result, do not cut wet grass because it tends to stick to the trimmer head
and guard, prevents proper discharge of grass trimmings, and could cause you to slip
and fall.
♦
Pay special attention when performing the work close to trees and bushes. The trimmer
head could damage sensitive bark, and damage fence posts.
♦
Fold down the plant protector to avoid bringing the cutting device into contact with hard
objects such as walls and curb stones.
NOTE
♦
The trimming line
19
will wear faster and require more feeding if cutting is done along
sidewalks or other abrasive surfaces or heavier weeds are being out.
♦
While trimming, the cutting device is possible to be blocked by grass or unevenly ground,
so the product will turn off automatically due to over current. Therefore, release the on/
off switch
3
for over 3 seconds and then press down again to go on with trimming.
After use
1. Switch the product off, remove the battery pack
22
and let it cool down.
2. Check, clean and store the product.
CLEANING AND MAINTENANCE
WARNING! Always switch the product off, remove the battery pack and let the
product cool down before performing inspection, maintenance and cleaning
work!
Warning! Danger of moving hazardous parts!
Cleaning
1. The product must always be kept clean, dry and free from oil or grease. Remove
debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the
product.
3. Inspect the product before each use for worn and damaged parts. Do not operate it
if you find broken and worn parts.
4. Never allow fluids to get into the product.
5. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
6. In particular clean the air vents after every use with a cloth and brush.
7. Remove stubborn dirt with high pressure air (max. 3bar).
