Euro Appliances MILAN EMEO45SX User Instructions Download Page 14

DISPLAY SYMBOLS

Pot

: when it lights up, it shows that a cooking function is on.

The pot does not light up when the oven light, preheating or defrosting function is activated.
When the pot is flashing, it shows the end of a cooking time. During the delayed start phase, the symbol is off and 
lights up when the oven starts cooking.

A   (automatic)

: when it lights up, it shows that a cooking time has been set; when flashing, it means the end of a 

cooking program.

Bell

: when it lights up, it means that the minute minder is on. 

When flashing, it means the end of the minute count.

SELECTING THE COOKING TEMPERATURE
With the oven switched on, the cooking temperature can be selected by using the     and
keys : the temperatures increases between the low and high setting with 5 degrees increases, which are shown on 
the temperature display.
Note: each cooking function has a preset temperature, which can be changed as described above.

SELECTING THE COOKING FUNCTION
With the oven switched on, the cooking functions can be selected by using the     and     keys:
the cooking function icons sequentially  light up.

COOKING FUNCTIONS

OVEN LIGHT
The internal oven light turns on by pressing and releasing the        key. To turn it off press and release again the 
same key.
When selecting a cooking function, the oven light turns on, and once the selected temperature is achieved, the 
light remains on for another 3 minutes.
During a cooking operation or defrosting it is possible to turn on the oven light by pressing one of the following 
keys

The light remains on for 1 minute.
The light can also be turned on when the Controls Lock function is active by pressing 
one of the following keys

PRH

  PREHEATING

This function allows to preheat faster the oven, before choosing a cooking function.
When this function is operating, a moving symbol appears on the temperature display.
The preheating ends when its preset temperature is achieved by the oven; this temperature cannot be changed. At 
this point, the oven beeps, the light symbol and the oven light turn on. Now you can choose an available cooking 
function with the      and

keys.

TRADITIONAL COOKING
This provides traditional cooking with heat from the top and bottom elements.

LOWER ELEMENT MODE
This is for slow cooking or for warming up meals.

TOP ELEMENT MODE
This is for gentle cooking, browning or keeping cooked dishes warm.

GRILL HEATING ELEMENT 
It is suggested  for grilling food.

GRILL HEATING ELEMENT WITH FAN

This function is suggested for a gently grilling of food.

ON/OFF

STOP

STOP

_ +

_ +

Summary of Contents for MILAN EMEO45SX





















Reviews: