WARNING: do not use this function for
cooking methods other than boiling water.
Never use oil. It can overheat and create fla-
mes.
Activating the function:
Select the proper plate. The decimal point lights
up.
Push sensor
(14). An A will appear on the
plate indicator and the pilot (10) will turn on. In
the timer for this plate, a moving segment will
appear which indicates that the system has star-
ted to monitor cooking.
When the system detects that it is about to boil,
an initial beep will go off. Take this time to prepa-
re the food you want to boil or cook.
After 30 seconds, a second beep will go off. If
you haven't done it already, now is time to put
the food into the pot.
After the second beep, the system will activate
the timer as a chronometer so that you can con-
trol how long the food has been boiling.
A few seconds after the chronometer is activa-
ted, a third beep will go off indicating that, from
this moment on, the system will reduce the
energy supplied in order to maintain a gentle
and steady boil. The chronometer will remain
active until cooking has finished.
If desired, the chronometer can be deactivated
and you can set a time for the countdown to
occur and the plate to automatically turn off (see
section Timer Function).
Deactivating the function
You can cancel the function at any time by
simply turning off the plate or modifying the
power level.
Safety shut off
If due to an error one or several heating zones
do not switch off, the appliance will be automati-
cally disconnected after a set amount of time
(see table 1).
When the "safety switch off" function has been
triggered, a
0
is displayed if the glass surface
temperature is not dangerous for the user or an
H
if there is a burn risk.
Keep in mind that this safety function
turns on even when the touch control is off!
Take precaution and do not place
objects on the touch control!
Timer function
(countdown clock)
This function facilitates cooking given that you
don't have to be present: You can set a timer for
a plate, and it will turn off once the desired time
is up.
For these models, you can simultaneously pro-
gram each plate for durations ranging from
1
to
90
minutes.
Setting a timer on a plate
To set a timer on a plate, you should take the
following steps.
1
Select the desired plate by directly touching its
corresponding indicator (3) and choose a
power level with the cursor slider (6).
2
The two digits of the timer for the plate selec-
ted will turn on, showing "
- -
". You can set the
amount of time desired with sensors
(12)
and
(13).
3
After a few seconds, the countdown begins.
When there is less than one minute left, the
clock will begin to count down in seconds.
12
Table 1
0
8
8
5
4
4
3
2
2
1
10 minutes, readjust to
9
0
1
2
3
4
5
6
7
8
9
P
Power
selected
MAXIMUM
OPERATION TIME
(in hours)
Summary of Contents for EMIN110B
Page 18: ...ERROR CODE LIST FOR INDUCTION HOBS...
Page 19: ......
