Euro Appliances E150WSCS 1, Usage And Care Manual, Page: 7 / 26

Avoid obstructing the internal fan (located inside on the back panel of the wine cooler)
Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the wine cooler to tilt forward.
Do not cover the wooden shelves with alloy foil or other materials, as it will obstruct air circulation
Do not move your wine cooler while it is loaded with wines. The might distort the main cabinet.
Defrosting/Hygrometry/Condensation/Ventilation
Your wine cooler is designed with auto defrost system. During its running, wine cooler has one time defrosting
process every 8 hours and it will last about 30 minutes.
The defrost water from the wine cooler storage compartment drains automatically and part of it goes into a
drainage container, which is located at the back of the wine cooler next to the compressor.
The heat is transferred from the compressor and evaporates any condensation that has collected in the pan.
Part of the remaining water is collected within the wine cooler for humidity purposes.
All Euro wine coolers are equipped with a double glazed glass door to minimize condensation on the glass door.
The unit is not totally sealed, fresh air admission is permitted through the drainpipe.
Air is circulated through the wine cooler by means of a fan /fans and the hollow shelves.
Important
The water collected by condensation, is therefore recycled. Under extremely dry environmental
conditions, you may have to add some water into the water container provided with your wine cooler.
During the refrigerating cycle, heat is given off and disperses through the external surfaces of the wine
cooler. Avoid touching the surfaces during those cycles.
Temperature Setting
Depending on the loading and settings chosen, it takes 24hours for the wine cooler to see the temperature
stabilizing.
During this time LED seems to move erratically in particular dual-zone wine coolers. It is normal process. This
process occurs whenever the setting is modified and/or whenever a large amount of bottles are added to the
wine cooler.