Euro Appliances E150WSCS 1, Usage And Care Manual, Page: 5 / 26

The wine cooler must be positioned that the plug is accessible. Release the power cord and move your wine
cooler to its finally location. The wine cooler should be installed in a suitable place where the compressor will
not be subject to physical contact.
Important
For freestanding installation, the wine cooler requires 30mm gap on both sides as well as the rear. This allows
the proper air circulation to cool the compressor and condenser. For built-in installation, the Wine cooler
requires 10mm space on each side and at the top as well as 10mm space at the rear. The air vent at the front
must never be covered or blocked in any way.
Levelling your wine cooler
Wine cooler must be levelled before loading your wines. Your wine cooler is equipped with 4 adjustable feet to
facilitate easy levelling. Euro Appliances recommends that you tighten the back feet to the maximum and
adjust the front feet to create a level.