background image

WARNINGS

•  Do not use the electric generator to test the LED lamp.

•  Please abide by related country, regional and local law and regulations when installing this fixture.

•  Please turn off the power before installation or maintenance.

•  Proper grounding is required to ensure safety.

WARNING/ AVERTISSEMENT

MIN 75°C SUPPLY CONDUCTOR 

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE 

CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 

IMPORTANT

WIRING DIAGRAM

•  To avoid possibility of electrical shock or fire, the installation 

personnel must have professional electric knowledge.

•  Please wear gloves to avoid injury before installation.

•  If smoke or fire is found in wires or led fixture during or after installation, 

please turn off the power immediately and notify relevant personnel.

•  Please check if there is any damage during shipping. If so, please 

contact manufacturer immediately.

•  Please read the installation instruction carefully to check whether 

all the accessories are complete. After confirmation, then install the 

fixture according to the installations.

INSTALLATION (1)

INSTALLATION GUIDE

MODEL #: ECS-150W1050

©2020. Euri Lighting | A Division of IRTRONIX Inc. All Rights Reserved

For customer service please call us at 1-310-787-1100
Office Hours: 8:00 a.m. – 5:00 p.m. PST Monday-Friday
E-mail: [email protected]

Questions?

THIS PRODUCT MAY NOT BE COMPATIBLE WITH ALL DIMMERS, FOR MORE INFORMATION ABOUT DIMMER COMPATIBILITY PLEASE VISIT: WWW.EURILIGHTING.COM

LED Commercial Fixture

Canopy Light

|Square Class

PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION

LED  Square

Canopy Light

1

3

Fix one side of the accessory 

safety rope on the back of the 

fixture.

Use electric drill to set fixed 

holes through the ceiling.

1

2

Fix another side of safety rope on the ceiling, then 

connect the wire of fixture to main power source 

according to local electrical connection code, make 

sure the wire joints are well protected, after that, fix 

the fixture on the ceiling with accessory screws.

Reviews: