4
Function
4.1 Power on sequence
During power on sequence some important tests are executed.
First the EEPROM data is loaded and verified. In case of fault a warning is given and
the whole EEPROM is formatted.
After this it is checked if free memory is enough.to store at least one additional model
memory. In case of fault a warning is given.
After this it is checked that the throttle stick is located at its initial position. In case of
fault a warning is given.
Then any switches are checked. If at least one switch is not in its off-position then we
are led to the switches dialog which shows us any swith value.
Each warning screen can be left with te exit key.
4.2 Data flow
ow we mentioned earlier, this radio works with a very simple calculation
model. Any stick value and any switch value is considered to calculate the
value of the outputs. Special attention is taken to handle any input with the
same priority and without any special function dependent meaning.
H
21
Summary of Contents for Th9x
Page 1: ...Th9x M AN U AL E URG LE TH 9X N G ...
Page 31: ...31 ...
