Picolo Tetra-X Product Description
19
6.
Picolo Tetra-X and Tetra-X-RC standard compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation or
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient
or
relocate
the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been tested and found to comply with EN55022/CISPR22 and EN55024/CISPR24. To meet EC
requirements, shielded cables must be used to connect a peripheral to the card. This product has been tested in a
typical class B compliant host system. It is assumed that this product will also achieve compliance in any class B
compliant unit.
Concerning video inputs, this equipment has been tested and found to comply with the following tests described in
EN50130-4:
•
§ 10, radiated RF immunity ;
•
§ 11, conducted RF immunity ;
•
§ 12, fast transient immunity.
Notice for USA
Compliance Information Statement (Declaration of Conformity Procedure) DoC
FCC Part 15
Notice for Europe
This product is in conformity with the Council Directive 89/336/EEC amended by
92/31/EEC and 93/68/EEC
Notice for Europe
Standard EN50130-4, immunity requirements for components of fire, intruder and
social alarm systems
