149
Open Source Software
The product firmware uses Open Source software components.
The list of Open Source software components and their corresponding license text can be
retrieved directly from the Embedded Web pages, at the following URL:
http://[device-ip-address]/licenses
Precautions of Use
Damage caused by improper handling is not covered by the manufacturer warranty.
Risk of Electrical Shock
Do not operate the device with removed enclosure cover.
Use exclusively isolated DC power sources with the adequate voltage and power ratings.
Operate the device and its power supply only in a dry, weather-protected location.
Risk of Permanent Damage
Electronic devices can be damaged by electrostatic discharges.
Euresys devices are compliant with electrostatic discharges regulatory requirements. However,
it is required to apply any general procedure aimed at reducing the risk associated to
electrostatic discharge.
Risk of Malfunction Due to EMI
Electronic devices can be disturbed by electromagnetic interferences.
Euresys devices are compliant with electromagnetic susceptibility regulatory requirements.
However, it is required to apply any general procedure aimed at reducing the risk associated to
electromagnetic interferences.
Risks Due to Overheating
In case of inadequate cooling, the temperature of the device may become excessive, leading to
a device malfunction, permanent damage, and risk of fire.
The device is designed for fan-less operation and natural air convection cooling. However, it is
required to apply any general procedure aimed at facilitating the circulation of the air flow
around the enclosure.
Risks Due to Poor Grounding Protection
Poor ground interconnection, ground loop or ground fault may induce unwanted voltage
between equipments, causing excessive current in the interconnecting cables. This faulty
situation can damage the electronic devices and its peripherals.
The computer and the camera can be located in distant areas with distinct ground connections.
The user must follow proper equipment grounding practices at all ends of the interconnecting
cables. In addition, it is recommended to use cable assemblies with overall shield solidly
connected to the conductive shell of all connectors. Besides the beneficial effect of cable
shielding on electromagnetic compatibility, the shield connection can increase the protection
level against grounding problems in temporarily absorbing unwanted faulty current.
Appendix
Picolo.net
Handbook
