STEP 3: Installing Support Arms on Rail Support Brackets
Slide Support Arms onto Rail Support Bracket at one end of the Smart Rail. Turn
adjustment knobs on Rail Support Bracket but do not fully tighten. Repeat for other
end of the Smart Rail.
STEP 4: Installing Fence
Slide one end of the Fence into the Fence Support Bracket. Then slide other end of
the Fence into the other Fence Support Bracket. Stabilizers do not need to be
installed at this time but will be installed during the calibration steps. The top and
side screws on the Fence Support Bracket do not have to be fully tightened at this
point in the assembly.
STEP 5: Attaching Measuring Tapes to Support Arms
Line up the end of one Support Arm with the 25” mark on the measuring tape selected
for that particular Support Arm. The measuring tapes can be temporarily attached
using tape, or permanently using the adhesive on the measuring tape. Temporary
attachment will allow for any adjustments in the position of the tapes to be made
upon completion of the assembly and calibration.
5