Appendix 2:
Trimming the Inserts
TRIMMING THE EDGES (EACs)
1. Tape the edges to a piece of scrap wood and lower the blade 1/16” below the wood.
2. Lock the blade using the depth control knob, pulg in the cord, and make your first cut. Cut
only has to be 1/16” deep. Save the piece of scrap wood for trimming other edges.
TRIMMING THE AC-2
1. Raise the blade above the wood.
2. Slide the insert in place until it clicks in the base.
3. Place the saw on the inside track
4. Clamp the track to a piece of scrap wood. Be aware of what is below the wood as this
trimming process involves cutting through the wood
5. Plug in the saw. With the blade well above the wood, start the saw and slowly plunge the
blade to cut the AC-2 and the wood together. Plunge to full depth of blade.
10