4.
Gently squeeze a shok lock between thumb and forefinger and
push its angled end into the insert up to the first barbs. The shok lock
must be straight.
5.
Hold the end rod upside down against a flat metal surface. The
pole tip should point up. Tap the pole tip lightly with a plastic mallet
until the bottom of the shok lock is inside the insert.
6.
Push the shok lock into the insert another 1/2".
7.
Thread 2" of shockcord into the insert on the end rod. The shok
lock will hold the shockcord.
8.
Release the vice grips and check the tension of the shockcord. If
loose, add tension by pushing more shockcord into the end rod. Be
careful. Once inserted, shockcord cannot be released.
Insert
Pull shockcord taut and
attach
vice grips here
End rod
Shok Lock
Angled End
