UV Technical Specifications*
Recommended Input Water Quality
S. No.
Parameters
Specifications
1.
Water Temperature
10° C ~ 40° C
2.
Iron Content
0.3 mg/ltr (max.)
3.
Chlorine Content
0.2 mg/ltr (max.)
4.
Turbidity
15 NTU (max.)
5.
Hardness
600 mg/ltr (max.)
Note:
The performance data presented in the table is applicable under standard laboratory conditions. Actual
performance may vary depending on the input water quality, water pressure and condition of filters.
*
Technical Specifications are subject to change without prior notice.
**
If the pressure is higher than the maximum specified, use of the pressure reducing valve is recommended. The
above accessory is available with our company at an additional cost.
***
Input water quality/pressure and TDS content are important determinants of recovery rate and TDS rejection.
S. No.
Parameters
Specifications
1.
Dimensions ( W x D x H ) in mm
316 x 251 x 462
2.
Net Weight
6.3 Kg
3.
Storage Tank Capacity
7 Litres
4.
Filtration/Purification modules
i-Filter
Miracle Cartridge
Chemi Block
Mineral Guard
Ultra Filter
Taste Enhancer Cartridge
UV Chamber
5.
Power Rating
20 Watts
6.
Input Water Pressure
0.4kg /cm2 (min.) - 2.0 kg /cm2 (max. )
7.
Input Power Supply
230 V AC / 50 Hz
Performance Data Sheet is available with Eureka Forbes Technical Documentation Centre
